Skip to content

SB Finish

Bringing Quality Back

  • Home
  • About Us
  • Projects
    • Custom Homes
    • Commercial Properties
    • Kitchens & Baths
  • Services
    • Surface Preparation & Sanding
    • Staining
    • Painting
  • Contact Us

Woodworking Tips And Advice From The Experts

  • 0 comment
  • February 21, 2017
  • by
  • sbfinish

Are you new to woodworking? This is the focus of this article. Woodworking isn’t that hard if you know what you’re doing. This article will show you a few useful tips to get started.

Anytime you are working around power tools, there is an element of danger; focus on safety at all times. Be certain to use all tools correctly and observe all safeguards. When your power tools are on, you should always be wearing safety equipment. Ending up in the emergency room is not a good way to end a woodworking project.

If you plan on staining your project, try using pre-stain conditioner on your wooden surfaces. You will get less irregularities or blotches if you apply a quality pre-stain product. This is because the conditioners allow stains to penetrate evenly.

Consider making your own sanding blocks that can be used again and again. Create six blocks of the same size from some plywood. Be certain the pieces are about two and a half inches by four and three quarter inches. Apply spray adhesive to both the blocks and the cork tiles. Apply the cork to the block and use a utility knife to cut the cork flush with the block. Then, spray your sandpaper with adhesive and apply it to the cork. Now cut the sandpaper flush with the cork, and label each block.

When you are budgeting for new projects, don’t forget to set aside money for any tools you need. This can be easy to neglect, since you might just be focusing on the cost of the wood. However, if you have to get tools that you do not have, this can break your budget.

If you’re looking to rent a tool you’ve never used before, ask for a tutorial before you leave the shop. There are usually specialists available to get you comfortable using the tool more quickly than learning it by yourself. Some places even have detailed handouts with tips that will help you get better results with the new tools you are using.

Before you pull out the glue, make sure the pieces you want to glue fit together properly first. Trying to move things around once the glue is on is likely to result in harm to the final project. Dry-fitting will let you plan out where each piece will go.

Before purchasing or using any type of wood, you should know all about it. For example, a wood that has a stain grade is good for staining. A wood that has a paint grade is lower quality. When it comes to veneer and particle board, veneer doesn’t usually absorb the right amount of stain, and particle board absorbs way too much. Getting the correct kind of wood will help you be sure that you can expect good results.

Learn all about the wood you are working with and its particular characteristics. Woods can differ substantially. Different types of wood will react differently to various stains. They will splinter in different ways, based on how you cut. Learning how different types of woods and different types of grain is important to your woodworking. These will all factor into your woodworking plans.

A golf tee is a wonderful fix for wiggling hinges. Put the golf tee in the screw hole to prevent wiggling. Trim the golf tee until it is flush with the surface, and then reinstall the door. The tee will provide the screw with something that it can bite into.

Do you want to tighten a screw but don’t have space to fit the screwdriver and your hand? Head to your toolbox. Get out your 12 point socket and a screwdriver. Use the socket to place on a screwdriver, and then attach it to a ratchet.

Avoid being a perfectionist about tape measures. You can use story sticks and work up to cut. Cutting on your scrap wood first will be a great idea so you can test a fitting out. Using different ways to plan cuts keeps things interesting.

In order to find great deals on woodworking tools and equipment, there are many places you can search, including yard sales, estate sales, garage sales, and even online. By buying used, you can save yourself a lot of money. You can save lots of money this way when you are a beginning woodworker.

Do not apply too much pressure when sanding wood. If you apply too much pressure, you can easily find that you’re left with a wood surface that is very uneven. Using sandpaper of an appropriate grit level will reduce the amount of force required. Use circular motions with light pressure to sand.

You can use a stair gauge to guide circular saws. Usually a stair gauge can be used in combination with stair jacks so the notches can be matched up. However by using both of them on the tongue of a carpenter square, you can make a useful guide for a circular saw.

As the saying goes — measure twice, cut once. In fact, you may even want to triple check them if you are using expensive materials. Make sure that you measure properly before you start. Cutting too short or at the wrong angle can wreck your wood.

Always wear snug clothes when working with wood. Loose clothes can cause accidents. In order to help keep yourself protected, a fitted shirt can be worn, tucking it into your pants. Also, boots with steel toes are going to allow you to keep your feet protected in case you drop something.

To begin a project that has new tools and techniques you haven’t used before, do practice runs to start with. Work on some scrap wood first. When that wood doesn’t work out, try a different material until you know what to use.

Woodworking is simultaneously challenging and rewarding. When you see your finished piece, you will be happy that you followed through and completed something of value that will last for years to come. Use what you learned here to get started and create beautiful wooden works of art.

READ MORE
  • woodworking
  • Tips
  •  
  • Woodworking

Starting Your Own Woodworking Business At Home

  • 0 comment
  • February 20, 2017
  • by
  • sbfinish

Are you good with your hands? Then woodworking may be a great hobby for you. Woodworking, or creating gorgeous items with wood, has been done for centuries. Many people greatly appreciate the items created by a talented woodworker. Keep reading if you want to improve your woodworking skills.

You should always test stain on a small area or on a wood scrap. This makes sure that you won’t run into any surprises. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.

Be certain you know what your budget is able to handle. Sometimes your wallet will restrict what you can actually do. It is the worst when you are making a project and figure out you cannot afford to finish. Be sure to budget in advance to be prepared for any eventuality.

Keeping a small ruler with you in a pocket is a great idea, however it may fall out easily because of its length. Make it a metal ruler and store it alongside your telescoping magnet. This magnet helps you keep the objects together and in your pocket.

If you plan to use a saw, ensure the blade is sharp. A blade that’s dull will make it very hard to use your saw correctly. It can also cause you to make errors in your cutting.

Choose the correct nails when starting a project. If you use a nail too big for the task, it may split the wood, ruining the piece. A small nail, however, won’t be able to join the wood together. It is important that you find properly sized nails in order to have a successful project.

Are you working with a screw in a space that is insufficient for your screwdriver and your hand to fit simultaneously or comfortably? Look in your toolbox. Get out your 12 point socket and a screwdriver. Place the socket on the screwdriver, and then attach it onto your best ratchet.

Look for recycled wood. Many woodworking places discard their scraps and that could prove quite useful for your project. Home improvement stores, floor shops and other such places usually discard any unused wood. You can use this wood for your projects. This can help you save a great deal of money.

Protect your eyes when you are working on a project. So, never turn a mental blind eye towards wearing your goggles, or you might just wind up with a real one. If your goggles don’t fit well or provide clear eyesight, find the pair that do.

Don’t apply strong pressure when sanding. Sanding while using pressure will make a surface less even because you’ll be gouging the surface. Using sandpaper of an appropriate grit level will reduce the amount of force required. Just use a light touch as you sand in a circular motion.

If a saw guide for a circular saw is needed, a stair gauge will work perfectly. A stair gauge can help match the notches up. This is a good guide to use with a circular saw.

Drafting squares help you be precise with your cuts. If you have to cut wood at about 2 to 3 feet, it’s hard to measure it right. Drywall squares are notorious for their inaccuracy, and a carpenter square must be attached to the edge of your piece, which can be cumbersome. Pick up a drafting square at an art store instead. Such squares are easy in use and surprisingly accurate.

Before cutting any wood, write down your plans for the cuts. It is best to be organized before tackling something, and writing it all down first will keep things clear and concise. Knowing everything you need will make the process more efficient. Plan well in advance, and it’ll be a much smoother ride.

Watch television programs on woodworking. These shows offer invaluable information and ideas to take your projects to the next level. Just check you local TV guide for the public TV shows. Basic cable networks have a number of DIY shows as well.

Get a budget put together for when you’re doing woodworking. After you select a project, remember to take a moment to work out the costs of everything that is involved to complete it. What do you need? What will it cost? You want to make sure you can actually afford what you want to do.

Before you use wood stains on your projects, prepare the wood to absorb it evenly. One great way to get this done is to treat the wood with a pre-stain conditioner. These conditioners soak into wood grain to help it soak the stains evenly. Finally, once stain is applied, take an old shop rag and gently remove any excess stain from the lumber.

If you’re planning a large project, look online to see what other people have done. You may take a different approach, but at least you’ll know some of the difficulties you’ll face. It may even give you some new ideas or insight into better ways of doing things.

Before beginning a project, know what you are doing. You don’t want to just go over the directions one time to figure out that you’re making mistakes. Try going over the instructions thoroughly a couple of times to know you’re doing things correctly.

You will not need to buy all your woodworking tools right away when you just beginning to learn the craft. Rather, look into borrowing tools from family or friends. It may be the case that you can stock up on tools rather quickly at very little cost.

As you get more experienced, your woodworking skills will improve. With every project you do, you will gain experience and confidence. If you are intent on something big and complex, think about easing into it, using a gradual learning curve of shorter, easier projects before you tackle the big one.

If you love to create with your hands, have you considered creating with wood? Now you should be able to start making wood pieces of your own. Use these tips to better your woodworking skills up to an expert level.

READ MORE
  • woodworking
  • Tips
  •  
  • Woodworking

Essential Tips About Working With Wood

  • 0 comment
  • February 20, 2017
  • by
  • sbfinish

Are you new to woodworking? This article is intended to help. Woodworking with the right advice can help you have a much easier and fun time. Continue reading the article below for some great advice to start out with.

Use pre-stain conditioners if you’re going to stain the wood. If you use pre-stain conditioners on your project, you’re going to be not as likely to have irregularities on the project when you’re done. Also, it will create a smooth texture upon completion.

Pick out the right kind of wood. Not all woods are equal. Learn about the types of wood you are using.

When you develop a budget, remember to take into account all new items that must be purchased. It’s simple to overlook this as you are thinking about the wood costs associated with a project. Consider all expenses as a whole to see if the cost is workable with your budget.

A stair gauge is a great tool to keep in your shop. They are most often used to layout stair jacks, but you can use them to clamp your carpenter’s square. You can then use your square as a guide for a circular saw. When you use the square, every cut will be perfect.

If the hinges on your interior door have become loose, you can fix it with a simple golf tee. Take the door from the hinges and tap your golf tee into every screw hole. Get rid of the excess part of the tee by cutting it and put the door back up. This technique fills in the missing wood and helps hold the screw tight.

Make sure to properly protect your ears. The machines and tools you use will be noisy. If you ignore this and don’t use protection, you can easily find yourself with some hearing loss before you know it. Disposable earplugs are available, or you can invest in a pair of high quality headphones. Regardless of your personal choice of ear protection, make certain you always use them when woodworking.

Are you finding it hard to be able to reach a screw that you need to tighten? Have a look in your toolbox. Grab a screwdriver with a long handle and a socket that’s a 12 point. Place the socket on your screwdriver, then attach this to a ratchet.

Drinking a few beers on the weekend seems like a good idea when you feel like building a few things. But you should never do that while practicing woodworking. Avoid all woodworking when you are having alcohol. This rule applies to any drug that may affect your ability to think clearly, whether legal or not.

Use the skills you have in woodworking to make your yard better. You can build a deck and a bird feeder. The resulting birds can reduce insects, giving you the peace you need to create more projects. If professional woodworking is a thing you want to do, you should meet up with clients on the deck if you can so they can see what you’re able to do.

Always keep your eyes open for furniture that someone is getting rid of. Often, people give away furniture just to get it out of their home. Think about all the possibilities before you dismiss a piece. If an old dresser has outlived its usefulness, the wood itself has not. Use the drawers to fashion an artistic bookcase.

Make sure that your woodworking area has lots of light. Obviously, lighting is necessary so that you can see what you are doing. This can help you see area where you need extra sanding. Additionally, extra lighting will help ensure that your stain is applied evenly.

Before you sand something, you should get the surface a little wet. The moisture will cause the grain to come up. That helps you avoid scratches. This will give your finished woodworking project a professional appearance. This will also help you have less work in the future.

Keep in mind that you need certain tools prior to starting any woodworking project. If you don’t own them already, you will want to get a circular saw, small table saw, jigsaw, a drill or driver and a power sander. An orbital sander is ideal, but any power sander is better than none.

You can create sanding blocks that are custom made for you. Start by cutting the wood in the shape and size that you would like. Glue the sandpaper onto the block and give it plenty of drying time. Then you have a sanding black that is the perfect size for the job.

Do you know all of the steps necessary to finish your project? You should not be reading directions for the tools you want to use after beginning your project. Take the time to read over them a few times prior to beginning so that you do everything right.

Make sure the blades on your saws are sharp at all times. The majority of workshop accidents occur from use of dull saw blades. Wood will kick back when blades are dull. The kickback thus results in accidental injury. You will obtain the best results by keeping your drill bits as sharp as possible.

You can learn from watching someone else work with wood. Lots of online tutorials exist that demonstrate the proper use of tools. Watching a video allows you to see the entire process within a short amount of time.

Write down your measurements to get them right every time. Do this on each side of your blade. If you can’t read this, then put a label onto the shoe so then you can write on it.

Always remember that you will improve your woodworking skills as time goes on. Each project will gain you more experience, as well as confidence. To get to the level where you can complete complex projects, practice on smaller projects.

It can be difficult to work with wood, but it feels rewarding as well. You will have a sense of pride when you finish a piece of wood. Take what you learned here to come up with dazzling pieces of wood.

READ MORE
  • woodworking
  • Tips
  •  
  • Woodworking

Easy, Quick Answers About Woodworking Are Here

  • 0 comment
  • February 20, 2017
  • by
  • sbfinish

Easy, Quick Answers About Woodworking Are Here

People all over the world enjoy woodworking as a hobby. In fact, many folks do it to make a living. Use the tips below to help learn how to work with wood.

Always make safety first with a woodworking project. Make sure you know how to use power tools properly and always wear safety equipment. Don’t take the guards off the tools you have as they were put there for your protection. You don’t want to begin a project and get seriously injured.

Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. This can help you avoid surprises in case your stain color is different after you’ve applied it. Wood and stains can surprise you, so test things out before you put it on the final project.

Try using stair gauges for your crosscut guides. Clamp them on the carpenter’s square. Then mark the notches. Putting them both on the carpenter’s square’s tongue will make an excellent guide for your circular saw.

When you make your budget, remember to itemize tools that you have to buy. It’s too easy to overlook this. If you don’t have a tool, you must keep this in mind.

Never use your fingers when guiding the cut of a slim piece of wood. Instead, push the pieces through your saw with a long strip of wood. This will ensure that you keep all ten of your fingers, which are all necessary for you to continue working with wood.

Every woodworking shop should have a stair gauge in it. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square. That makes the carpenter square a guide for the circular saw. Using the square, you will have perfectly straight cuts every time.

Before purchasing or using any type of wood, you should know all about it. Paint grade wood is generally of lower quality and stain grade has better grain patterns. Veneer and particleboard are different too. Veneer doesn’t absorb stain and particleboard absorbs more. Having the right wood will help ensure that your project goes as planned.

Do you have door hinge screws that have worked themselves loose, and you can’t tighten them into the wood at all? A golf tee can solve this. Remove the the door and the hinges from the door frame and gently tap a golf tee into each screw hole. Chop off the excess part of the tee, then replace the door. The golf tee fills the hole and provides additional material to hold the screw.

If woodworking is new to you, it pays to carefully read plans prior to starting projects. Be certain you understand the plans, and that they’re complete. If you cannot understand them or something is missing, someone from a local home improvement center may be able to help you.

Take a look at estate sales and also yard sales to find inexpensive woodworking tools. Try to purchase used products that are in good condition because you can find excellent deals on top-notch products when you do this. This will save valuable cash, especially if you are new to the hobby or are needing to quickly replace a broken tool.

If you are just starting out in woodworking, consider using kits. All the wood has been pre-cut for you in these kits and it is your task to simply put them together. That lets you focus on getting a handle on woodworking. The practice will save you money on wood and supplies in the future because you make less mistakes.

If a saw guide for a circular saw is needed, a stair gauge will work perfectly. Normally a woodworker uses a stair gauge to ensure each stair has an identical rise. This is a good guide to use with a circular saw.

Test out a wood stain on a part of the wood no one will see. Your stain may appear differently than anticipated, or it might not go on smoothly. By testing it in advance, you can avoid costly mistakes. This will ultimately lead to less work.

Plan out a woodworking budget. Find out how much materials will cost you. It is best to have the exact cost determined ahead of time. In this way, you will not be left with a half finished folly that you cannot afford to complete.

Before you use wood stains on your projects, prepare the wood to absorb it evenly. Applying pre-stain and conditioner is a great way to do this. Such products soak into the grain and produce even reception on the stain. After the stain is put on, use a shop rag to wipe away any of the stain’s excess residue from the lumber.

Save all scrap wood for future projects. You may need a piece of wood in order to fill a gap or clamp glued pieces together. You can even use them as practice when you buy a new tool.

Be sure you purchase the best tools you can. Tools that are cheap can break easily, causing a lot of frustration while you work on your projects. While you will spend more initially, buying a high-quality set of tools now will ensure that they will last a long time, even possibly for life. It actually saves you money in the long run.

Observing can be a great way to learn wood-working techniques. Lots of online tutorials exist that demonstrate the proper use of tools. You can watch the entire project from beginning to the end in videos that show every aspect of the project.

Write down your measurements so you don’t have to double check them. Do this on each side of the blade.

Many millions of people enjoy working with wood everyday. These tips should help you whether you are new or an old hand at woodworking. Each one of these tips could help you transform your projects into a thing of beauty. The time you took to read this article is really going to pay off!

READ MORE
  • woodworking
  • Tips
  •  
  • Woodworking

Recent Posts

  • What to Pick in a Kitchen Cabinet
  • Great Article on Wood Finishing.
  • Woodworking Tips And Advice From The Experts
  • Starting Your Own Woodworking Business At Home
  • Essential Tips About Working With Wood

Project & Services

  • Home
  • About Us
  • Projects
    • Custom Homes
    • Commercial Properties
    • Kitchens & Baths
  • Services
    • Surface Preparation & Sanding
    • Staining
    • Painting
  • Contact Us

Search

© 2022SB Finish | Proudly powered by WordPress | Theme by Theme Farmer.